Thermal Insulation, How To and what should be the manufacturing process? Heat insulation of buildings;rooftops, outward or garage, warehouse overlooking the walls of the unused partitions do not happen within the territory or premises with offices divides the floor, plumbing pipes made with ventilation channels. In addition, specially coated insulating glass units and insulation, window frames, consisting of reduced heat losses down by using the window type is limited to solar heat input into the building,. This allows saving of energy for heating and cooling.
The benefits of thermal insulation , to take full advantage of down cold, summer hot section overlooking the rooftops of all walls and floors, you will surely be insulated and must be used by qualified window. The main building of the roof thermal insulation, export or unused part until facing surfaces, heat transfer is made with the application of special insulation materials that reduce the.
Thermal Insulation, How To?
Roof isolation of roofs will be varied by the images of isolation of applications. Roof heat insulation, in the form of a sheet or mattress is made with a variety of insulation materials. Roof cover with ceiling tiles is the unused space between buildings, thermal insulation, ceiling tiles were applied on the series. Used Tween life as a venue for roof thermal insulation in buildings is made at the level of the roof. The wooden construction of the roof thermal insulation at Rafter, above or below. Concrete crushing is done on top of the concrete surface is usually on roofs. Terrace roof heat insulation, waterproofing layer of above or below. Heat insulation of the waterproofing on the drill down, featuring the “inverse roof”; waterproofing layer of heat insulation plate is located on the detail of the “traditional terrace roof”. Inverted roof waterproofing sheets in detail at the same time steam cutter duty. Heat, water, sound and fire insulation of the roof details should be resolved together and comfortable environment to obtain the materials chosen are not necessarily compatible with each other should be made accords providing for condensation.
The walls, insulation is usually mounted on the walls of various materials, from within or from outside of the building can be made from two layers of walls. External applications are based on all of the front heat insulating materials with sabitlenebildiği; thermal bridges does not occur. At the same time the application is made on the outside walls are hot and condensation does not occur. Exterior is to be used in heat insulation plates must be produced specifically for this application.
Windows a good heat insulation, quality, sealed, true applied and low thermal transmittance values joinery and insulating glass units is possible with. Buildings, doors are energy efficiency should be chosen taking into account.
An important element of the installation of thermal insulation and equipment (valves, fittings, etc.) is to isolate. Heating or cooling installation in isolation especially not heated or soğutulmayan volume from plumbing pipes or ducts with insulation coating. Cooling and thermal insulation of heating installations with large energy savings, business costs fall. Steam and boiling water systems due to the high surface temperature of people, says the accident avoided. Also due to overheating of boiler damage to other systems and prevents thermal bridges.
Thermal insulation, made of various insulation materials only, should not be seen as a process.Thermal insulation design is a process that must start in aşamaş. The most important factors that affect heat loss of the building of the press comes in which environmental factors and designers should take into account these factors.
External factors that affect heat insulation by theme are:
– The geographic features are: Latitude-Longitude, area of the building is curved or straight, like green or dry the staff were really helpful
– Climate properties
– The altitude
– Land property: direction, together with the neighbouring plot of land zoning parcel properties
– Places to look at aspects: it’s tremendous how North and South of the living room of Life, like the bedroom look East.
An effective thermal insulation for these factors, starting with carefully considered in terms of design and maximum resistance to these external influences of the building must be designed to show. Let’s stop the instantiated with pictures about how to heat Insulation.
Application Of Heat Insulation Wall
Thermal Insulation Roof Application
Thermal insulation Flooring Application [source image: I tbyali]
Thermal insulation Installation Implementation [source: lagayapi]
Heat-Insulating Glass Application
Heat Insulation Materials
Thermal insulation materials; reduction of heat loss and gain special high thermal resistance used in the materials. European standards thermal conductivity coefficients 0.06-0.10 W/m. K under the materials, heat insulation materials.
Heat insulation products used for the purpose of open porous and porous, can be classified as closed. Open-mesh or fiber materials; glass wool, rock wool (mineral wool), wood wool, ceramic wool, slag wool; is closed porous materials due to EPS genes merged in polystyrene, XPS eks polystyrene, polyurethane, polyethylene foam, glass foam.
These materials are usually roof, wall, floor and ground as building elements and is used in the installation. In addition to these materials comprise high-quality insulating glass unit with doors and Windows are also very important for heat insulation.
Insulating glass units are grouped into the following types:
– Standard insulating glass units
– Special temperature control coated insulating glass units
– Private heat and solar control coated insulating glass units
The main purpose of heat insulation products, is to increase the heat transfer resistance of building elements. Therefore isolating feature of these products determines heat transfer coefficients. The lower the thermal conductivity coefficient, it increases the product’s insulating property. Therefore, the low heat transfer coefficient of the insulation products. According to the insulation materials as well as drill down to apply; sound damping values, fire against water absorption values, the performances, the freeze-thaw resistance, load resistance press material for application under plays an important role in the selection. Ease of use and it is also sought in other economic thermal insulation properties. According to the application areas used for thermal insulation materials, below are listed together with the standards:
I. Building Insulation:
Wall (infill masonry, consturction), flooring, roof applications:
– Glass wool [TS 901/TS 901-1 EN 13162]
– Rock wool, [TS 901/TS 901-1 EN 13162]
– Expanded Polystyrene (EPS) [TS 7316 EN 13163]
– Extruded polystyrene (XPS) [TS 11989 EN 13164]
-Polyurethane (PUR) [TS EN 13165]
– Phenol foam [TS EN 13166]
– Glass foam [TS EN 13167]
– Wood wool slabs [TS EN 13168]
– Expanded perlite (EMU) [TS EN 13169]
– Expanded Cork (ICB) [TS EN 13170]
– Wood-Fiber plates [TS EN 13171]
II. Insulating Glass Units:
– Standard insulating glass units [TS 3539; EN 1279]
– Special temperature control coated insulating glass units [TS 3539; EN 1279; TS EN 1096]
– Private heat and solar control coated insulating glass units [TS 3539; EN 1279; TS EN 1096]
III. Technical (Industrial) Insulation:
– The fiberglass, [TS 7232, prEN 14303]
– Rock wool, [TS 7232, prEN 14303]
-Polyurethane (FAS) [prEN 14304]
– Glass (CG) [prEN 14305]
– Calcium silicate (CS) [prEN 14306]
– Extruded polystyrene (XPS) [prEN 14307]
– Polyurethane (PUR/PIR) [prEN 14308]
– Gene combined expanded polystyrene (EPS) [prEN 14309]
– Polyethylene foam (PEF) [prEN 14313]
– Phenolic foam (PF) [prEN 14314]
Source: İzoder, General information, thermal insulation, how to, izoder.org.tr