Water Tanks Types and Operation
Water tanks, water containers called to the store to use as needed. Reinforced concrete, stainless steel, galvanized steel, masonry, there are varieties such as plastics and fiberglass.
Water tanks on the roof is connected to the mains supplies, water storage and water cuts fullness of the float installation prevents the pressure to go back through the check valve in the water system.(Pressure in the existing water network) Water Tank Water Use Automatically when interrupted.
The building of basements usually made of concrete water storage systems or polyester as the water tank is shaped tank, booster presses clean water to the existing plumbing system of a building, water pump supply cut when the booster check valve through the water from the tank pull the building continues to push the water system or the dollar network direct store booster print permanent storage of water into the building systems so that water drawn from the ground to the water accumulated in the storage tank water pump is in constant cycle times remain clean and fresh.
It can be connected to a separate tank for clean water supply to the building connected to a shared storage can be used for both fire water. The bottom half of the water tank is dedicated to fire equipment. Water tank capacity should be taken into account when calculating this regard. should not be used for other purposes reserved section for fire extinguishing systems; removed water should only be arranged to serve the extinguishing system. Works just as the sprinkler system fire cabinet system should be available to meet the storage capacity for a minimum of 200 liters per minute flow rate of 60 m³ and 12 should not be less that. In this case, according to fire regulations ranged hazard class should be checked.
Water Tanks Types
Water is called the water storage containers to store for later use. Water tanks are made open to the atmosphere. Steel water tanks are manufactured from fiberglass and kagiru. be cylindrical or prismatic. Connection is made according to the selected storage location to use the feature.
The best that could be closed to make the necessary cleaning of water tanks and vents should be open lid with a cleaning. Vent tilted down or left end of the ventilation pipe should be. Contents should be isolated to prevent the water freezing in the winter and heat in summer. outlet pipe to flow to the installation of the base collapsed sediment from the mouth of the warehouse floor must be 10 cm high. Warehouses ago should be placed between the roof top installations were done deal. Roof becomes extremely hot during the summer. Water produces bacteria at 30-40 ° C. It creates a favorable environment for growth of microbes. In particular, it is the major cause of people getting Legionnaires’ disease. Also interposed between tank roof, it creates an additional load on the building. The basements of the cooler that is placed before the booster pump to feed. Or feed water booster pump meets this store. A dirty water pit near the depot should be made as a precaution against overflow. Warehouse wood, steel or masonry should be on the mat. Today the store is self-made pedestal produced.
Water Tank Installation Rules
The shortest path to the water tanks and boosters must be connected as straight as possible.Unnecessary turn affect the pump suction. The pump case is always to be filled with water bağlanır.s store the high connection port, a different warehouse as the düşürülür.aşağı the pump level through the return pipe and pressure connection is made. In this connection, the air required for the booster, the injector is provided to put on the air tube.